TH2010-X controller instructions for use

Upgrade Version V2.5

Control: TM18XX, UCS19XX UCS6909, WS2811, LPD6803, LPD8806 ... series of the IC, ordering please specify the IC type.

The new features are as follows: AC and DC power input, the AC AC synchronous, any combination of effects, with the differential signal output connection synchronization without external 485 module.

One. Basic parameters:

      Operating voltage: DC 12V / 24V or AC 12V / 24V

       Operating Current: <60 mA,
       Operating Temperature: -20 ° C - 60 ° C
       Size: the L100 * W70 * H25 mm
       Weight: 0.25kg
       Effects model: 114 kinds of common outline effect has
       Maximum control points: 1024 points low speed / high-speed 2048
       Controller from the distance of the light bar (there are two kinds of signal output TTL signals and 485 differential signal):
       TTL signal distance: the low-speed mode <= 30 m, high-speed mode <= 10 m

       485 differential signal: low-speed mode <= 300 m, high-speed mode <= 200 m (lights need to add 485 receiver board)

       The distance between the cascade synchronization controller and the controller (there are two kinds of synchronization methods, AC AC synchronous connection synchronization):
       AC AC synchronous: the distance between the controller and the controller does not limit, as long as electricity can.

       Connection synchronization: the distance between the controller and the controller up to 200 meters, and can be cascaded up to 64 units.

Two. Controller and the light rail connection diagram (TTL the signal connection):

Three.  Product Application:     

        TH2010-X functionality has been fully upgraded, not only in the light bar or test, can also be used in contour lighting, and other large projects, such as used in the various buildings, bridges, buildings lighting engineering, stable, the wiring is simple, easy to operate, quick to use.

        Its contours better than the SD card controller effect is more beautiful, natural, smooth, because all the effect of the program algorithm without dropping frames recorded the effect of non-SD card controller, from the price, quality, effectiveness, in terms of may be the best choice of the contour lighting project.

Four. Features:

        4 button operation, 4 digital tube display, easy to operate, intuitive display.

        Comes with two kinds of signal output, a TTL signal and 485 differential signal (long-distance transmission).

        Built-in 114 kinds of outline effect, rich, beautiful, natural, smooth, non-SD card controller than without their own recording of the peace of mind and convenient

       Any combination of the effects loop (which can edit the playback menu, for example, playback, playback, playback of 100 and so on, can be recorded up to 32 effect combinations of loop), the effect of application of heart and wish.

        AC AC synchronous (input AC 12V or 24V when using the AC AC synchronous, each controller parameters adjust synchronization settings menu into the F-AC, while power-on, you can sync), quick and easy application, so the control of the whole project The system is more simplistic.

        Connection synchronization (no external 485 module is a direct connection, the parameters need to set, do not power on, set a good master, the master on the operating points change in control followed), convenient connection, synchronization is more stable.

        Control of all single line on the market, two-lane Lighting IC (orders must be marked with the IC model, the manual for single-IC series).

Five.    Interface Description

      RXA: simultaneous reception line.

       RXB: simultaneous reception of the B line.

       The TXA: Send A line synchronization.

       TXB: synchronized to send the B line.

       CLK/DIN-: 485 differential signal output line B (485 by 485 receiver board B), compared with the control wire IC clock line CLK.

       DIN +: data output DIN 485 differential signal output line A (using 485 then 485 receiver board A)

       GND: Signal ground.

       COM: common power input (not connected with GND), regardless of AC or DC power supply, power supply in which a line connected to the terminal, regardless of polarity, if it is the recommended power supply of DC input negative pole of the terminal.

       12V: DC or AC 12V power input, regardless of polarity, if it is proposed the positive power supply of DC input connected to the terminal, the power of negative to COM.

      24V: DC or AC 24V power input, regardless of polarity, if it is proposed the positive power supply of DC input connected to the terminal, the power of negative to COM.

Data output port comes with two kinds of signals, TTL signals and 485 differential signal, then the method is as follows:

       TTL signals: light bar on the DIN connected to DIN +, GND GND.


      Differential signal: 485 differential receiver converter board B then CLK/DIN- of, an A-DIN + (Note: the use of differential signals in the light bar plus a 485 differential receiver converter board is recommended to use
       This controller supporting 485 differential receiver converter board, Model: TH2010-485MD), connection diagram is as follows:

Connection synchronized connection: a controller on the TXA, TXB, respectively, to take over a controller RXA, RXB, one a cascade down, up to cascade 64.Between each controller
       Distances up to 200 meters. The synchronous master menu is set to "F-Sr points to control the synchronization menu is set to the F-Ct", connection diagram is as follows:

AC synchronous AC: AC synchronous AC must be 12V or 24V AC power supply, each controller parameter set, the synchronization menu set to "F-AC, and then
              Power-on can be, Do not power the controller operation or it may appear out of sync.

              Note: If the input is DC you can not use the AC AC synchronous.

Six. Key Functions:

(1) On / Off: Power on / off

(2), -: mode - / Speed ​​-

(3), +: mode + / Speed ​​+

(4), the Mode / Speed​​: Mode conditioning / speed adjustment function switch

Seven, The effect of video:

        http://v.youku.com/v_show/id_XMzE2NTk0MDgw.html

Eight. Model Description: