|
| Name: LED wireless the Symphony controllers CTL004 interface leads the way |
| Model: CTL004 |
| Standard: CTL004 |
  |
| Product Details |
CTL004 controller instructions for use
Control: TM18XX, UCS19XX UCS6909, WS2811, LPD6803, LPD8806 ... series of the IC, ordering please specify the IC type.
One, The Basic parameters of the controller:
Working voltage: DC12V
Operating Current: <60mA
Operating Temperature: -20 ° C - 60 ° C
Size: the L100 * W70 * H25 mm
Effects model: 114 kinds
Control Points: 2048 points
Controller from the distance of the light bar: high-speed <10 m, low <30 m distance greater than 30 m must be added to the signal amplifier (TTL to 485 modules TH2010-485MD)
 Two.Interface Description:
Input: Power from the right access, DC12V power supply, the joint use of the the DC2.1 mother Block positive with respect.
Output: then light strip Lead 2.54 master output, 4-cell line sequence 12V, GND, GND, DAT, respectively.
Three. The controller Points, settings:
(1), according to the wiring diagram to connect the lights on the power, the controller is switched on by default.
(2) switched on press the On / off button to shut down (turned off to set the control points).
(3), the shutdown state, long press "Mode / Speed" key for 3 seconds into the "control points Settings menu, then 4 digital LED display for the control of point size, through the" - "and" + "button to adjust control points (long press can quickly adjust).
Note: The control points set is designed to facilitate the customer to control the length of the light bar. For example: to control the roll of five meters long, 10 pixels per meter light bar will point the function can be set to 50, and to control the roll of 10 meters in length, 10 pixels per meter light bar you will need to points is set to 100, and so on. The factory default points to 50
(4) After setting, press the "Mode / Speed" button "Save" and exit.
Four. The controller is the key function:
(1) On / off: Power on / off
(2), _: mode - / Speed -
(3), +: mode + / Speed +
(4), the Mode / Speed: mode regulator / speed adjustment function switch (digital tube display H-mode regulator, S is the speed adjustment.)
|
|
